DTF Powder Parameters
Model: TP107
Product Name: Outdoor Heat Transfer Powder
Material/Composition: TPU
Particle Size: 80-161μm
Melting Point Range: 120-131°C / 248-268℉
Application Settings:
- Time: 12 seconds
- Temperature: 160-170°C
- Pressure: 4 kg
Wash Resistance:
- 40°C wash: Rating 4
- 60°C wash: Rating 3
- Dry cleaning: Rating 4
How to Transfer DTF?
- Design and print patterns on DTF PET film.
- Wear gloves evenly cover the DTF adhesive powder on the printed surface, and shake off the excess powder.
- The preheating temperature is controlled at 110-130°C.
- Hot pressing temperature is maintained at 120-160°C. Place the processed transfer sheet on the fabric surface and press for 8-15 seconds.
- Cold peeling or hot peeling can be selected.
DTF Powder Usage Instructions
- Professional commercial environment operation, equipped with a complete ventilation system and fume extraction device.
- The ambient temperature is maintained at 23-27°C and the humidity is controlled at 55-75%.
- Protective clothing, N95 protective mask, protective glasses, and chemical-resistant gloves must be worn during operation.
- Stay away from the printing equipment. It prevents powder from contacting the platen and entering the ventilation system.
- It is strictly forbidden to inhale or contact TPU powder and curing fumes to avoid health hazards.
- Prevent powder from entering the printer system, otherwise it may cause equipment damage not covered by the warranty.
- Wash hands thoroughly with soapy water after operation and clean all surfaces that have come into contact with powder.
- Use sealed containers for storage in a cool, dry and ventilated place away from moisture and fire.
评价
目前还没有评价